View B39202B7692A710_4371971.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? epcos ag 2008. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components baw duplexer wcdma band ii series/type: ordering code: b7692 B39202B7692A710 date: version: december 11, 2008 2.0
2 december 11, 2008 b7692 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw duplexer data sheet application n low-loss baw duplexer for mobile telephone wcdma band ii systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz features n package size 3.0 x 2.5 mm 2 , max. height 1.15 mm n rohs compatible n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n fully matched by integrated matching network n e lectrostatic s ensitive d evice ( esd ) bottom view side view top view 3.0 2.5 123 6 7 8 5 0.5 4 0.6 0.5 0.4 1.05 1.1 0.65 9 pin configuration n 3 tx input n 1 rx output n 6 antenna n 7, 8, 9 to be grounded n 2, 4, 5 to be grounded 1 6 2,4,5 3 7,8,9
3 december 11, 2008 b7692 1880.0 / 1960.0 mhz saw components baw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +85 ?c ant terminating impedance: z ant =50 w rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w characteristics tx - ant min. typ. @ 25?c max. center frequency f c 1880.0 mhz maximum insertion attenuation @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). - 2.2 3.0 2) 2) -10 to +55 ?c db @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) - 2.2 3.2 3) 3) +55 to +85 ?c db amplitude ripple (p-p) - @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) - 1.0 2.0 db error vector magnitude @f carrier 1852.4 ... 1907.6 mhz evm 4) 4) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. - 1.2 3.8 % input vswr (tx port) 1850.0 ... 1910.0 mhz - 1.7 2.1 2) 1850.0 ... 1910.0 mhz - 1.7 2.2 3) output vswr (ant port) 1850.0 ... 1910.0mhz - 1.8 2.2 attenuation a 50.0 ... 1574.0 mhz 30 34 - db 1574.4 ... 1576.5 mhz 36 41 - db 1770.0 ... 1830.0 mhz 10 22 - db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 45 55 - db 2110.0 ... 2155.0 mhz 20 38 - db 2400.0 ... 2500.0 mhz 20 28 - db 3700.0 ... 3820.0 mhz 14 20 - db 3820.0 ... 6000.0 mhz 5 8 - db
4 december 11, 2008 b7692 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw duplexer data sheet characteristics temperature range for specification: t = C10 ?c to +85 ?c ant terminating impedance: z ant =50 w rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w characteristics ant- rx min. typ. @ 25?c max. center frequency f c 1960.0 mhz maximum insertion attenuation @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). - 2.6 3.5 db amplitude ripple (p-p) @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) - 1.3 2.0 db error vector magnitude @f carrier 1932.4 ... 1987.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. - 2.0 3.8 3) 3) +10 ?c to +85 ?c. % @f carrier 1932.4 ... 1987.6 mhz evm 2) - 2.0 6.0 4) 4) -10 ?c to +10 ?c. % input vswr (ant port) 1930.0 ... 1990.0 mhz - 1.8 2.2 output vswr (rx port) 1930.0 ... 1990.0 mhz - 1.8 2.2 attenuation a - 0.3 ... 1770.0 mhz 30 35 - db 1770.0 ... 1850.0 mhz 38 44 - db @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 48 55 - db 2075.0 ... 2400.0 mhz 15 40 - db 2400.0 ... 2500.0 mhz 35 48 - db 3860.0 ... 3980.0 mhz 30 50 - db 5620.0 ... 5820.0 mhz 15 40 - db
5 december 11, 2008 b7692 1880.0 / 1960.0 mhz saw components baw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +85 ?c antenna terminating impedance: z ant =50 w rx terminating impedance: z rx =50 w tx terminating impedance: z tx =50 w imd product level limits at rx fre- quencies and at rx port 1) (1930 ... 1990 mhz): 1) imd product level limits for power levels p tx = 21dbm (antenna port output power) and p blocker = -15dbm (antenna port input power). min. typ. @ 25?c max. blocker 1 80.0mhz - -112 - dbm blocker 2 1770.0 ... 1830.0mhz - -110 - dbm blocker 3 3840.0mhz - -86 - dbm characteristics tx - rx min. typ. @ 25 ?c max. isolation a @f carrier 1852.4 ... 1907.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (6). 50 54 - db @f carrier 1932.4 ... 1987.6 mhz a wcdma 1) 48 54 - db
6 december 11, 2008 b7692 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for umts-passband, f carrier ranges from 882.4 mhz (lowest tx channel) to 912.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings temperature range for specification t C10/+85 ?c operable temperature range 1) 1) defines the temperature range in which the baw device keeps its typical characteristics, however the specification values are not guaranteed. t C30/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 3 v esd voltage v esd 100 2) 2) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at p in source and load impedance 50 w 1850.0 ... 1910.0 mhz elsewhere 30 10 dbm dbm continuous wave t = 55?c, 50.000 h } s s d21 f () h rrc ff carrier C () 2 f d h rrc f () 2 f1 = d
7 december 11, 2008 b7692 1880.0 / 1960.0 mhz saw components baw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (ptf) frequency response tx-ant (wideband)
8 december 11, 2008 b7692 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw duplexer data sheet frequency response ant-rx (ptf) frequency response ant-rx (wideband)
9 december 11, 2008 b7692 1880.0 / 1960.0 mhz saw components baw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (ptf)
10 december 11, 2008 b7692 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components baw duplexer data sheet references type b7692 ordering code B39202B7692A710 marking and package c61157-a3-a47 packaging f6107-v8211-z000 date codes l_1126 s-parameters b7692_nb.s3p b7692_wb.s3p see file header for pin/port assignment soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2008. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
11 december 11, 2008 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, cssp, ctvs, dssp, miniblue, mkk, mlsc, motorcap, pcc, phasecap, phasemod, siferrit, sifi, sikorel, silvercap, sim- dad, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks reg- istered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B7692A710

	To Download B39202B7692A710 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .